For this exercise most of
the comments received were not on the description of the problem but further
clarifying the solution. The areas of
the rewrite are to further clarify and underscore the kind of vehicle that this
technology can be utilized for, how it might be used in the future and what the
technological hurdles might be.
Problem:
Countries all over the world are struggling to reduce emissions and have
enacted increasingly stringent regulations, particularly with respect to
vehicles, trains and ships. Customers
are also demanding higher miles per gallon (MPG) ratings from their vehicles
and are using this as a criterion in the selection of their next vehicle
purchase. Manufacturers are trying to stay ahead of these regulations and are
increasingly extending their MPG ratings through aerodynamics, gearing, weight
reduction, braking, etc. While these
improvements have been substantial, manufacturers are increasingly turning to
alternative energy systems for future improvements in emissions reduction.
The solution:
Our proprietary Cryogenic Power generation system uses nitrogen to extend the
gas mileage in any hybrid vehicle by 2.6 times its current mileage. The technology only currently works on hybrid
technology because it uses the battery pack to store energy and use it later to
move the vehicle. It uses exhaust from a
standard combustion engine to heat the liquid nitrogen (LN2) from its 196 degrees Celsius, (or -321 degrees Fahrenheit) and turn it
rapidly into a gas. That conversion from a liquid to a gas puts out 41,000
pounds per square inch of force. In
order to get a similar PSI, you would have to go over twice as deep as the Marianas
trench (the deepest point in earths oceans).
This force is easily
demonstrated by student who put a small amount of LN2 into a 2 liter coke
bottle and screwed on the lid. With no
escape value, you see the impact of the LN2 expanding from its liquid state
into a gas 700 times its volume. The
video link is available here. https://www.youtube.com/watch?v=o3eP_ZNYi_U
Imagine that same force
being safely sent into a turbine that then creates electricity that can be sent
back into the battery. The technology
could eventually be used to power a conventional car, through direct mechanical
power or even replacing the existing combustion engine. This would require solving the
problem of having a low energy heat source that can quickly transfer the liquid
into a gas. As you can see from the
referenced video, it took almost 12 minutes to do that using a warm
liquid. This timeframe is not acceptable for the purposes of driving electricity. It has to be more immediate than that and that is why we use the vehicle's exhaust to accelerate the process.
The hurdles that exist for use of this technology by an ordinary driver are that it could create frostbite given the extreme
storage temperature. Safety precautions would have to be taken (i.e. wearing
gloves and shop glasses). This would
have to be engineered out of the fill up procedure so that the driver had
something like a gas pump to use for a fill up.
Similarly, If the safety
valves were either plugged up or deliberately blocked, there would either be an
explosion, like you see in the video. In order to avoid that the Dewar (storage
tank) would have to be engineered to fail or open, releasing the nitrogen gas
harmlessly into the atmosphere.
Our primary customer is
the transportation industry. Our eventual goal is to get the system into all
types of vehicles. Given the recent drop in fossil fuel prices, we will focus
on heavy vehicles first, where the fuel savings and emission reduction will be
felt most: buses, trucks, trains and ships. Given the brevity of this
submission, let’s focus on potential benefits for the railroad market. Locomotives use diesel engines to produce
electricity, which powers a train.
According to the 2013 Bureau of Transportation Statistics, there were
over 25,000 locomotives in operation in the U.S. They also reported that a
train gets an average of .14 MPG and travels an average of 60,000 miles a year.
Despite the cost of diesel fuel plunging to a recent low of $1.86 per gallon,
using the Cryogenic Power system could further drop the cost of fuel from
$13.29 a mile to $9.23 per mile -- resulting in a savings of $243,000 per year
or $7.3 million over the locomotive’s 30-year lifespan. Moreover, this would save 263,736 gallons of
diesel fuel annually. The EPA estimates
each gallon of diesel fuel expended results in 22.38 pounds of CO2 emissions,
along with other harmful gases. Installation of the Cryogenic Power system
would therefore prevent 5,902,418 pounds of CO2 from entering the atmosphere
every year. If diesel prices return to
$4 pre-collapse levels, the cost savings could easily be double that of the
projected amount. It could be even more
if we drive the price of liquid nitrogen (LN2) below $.50 a gallon, which we
believe could be achieved when purchased in bulk quantities.
Beyond the vehicle market,
this system could be used to store energy created by solar, wind or other
alternative energy generation sources in remote areas, where traditional fuel
delivery is sporadic or costly. The CPI
system has roughly the same energy storage equivalent of a lithium battery.
Unlike chemicals found in batteries, LN2 is inert. A LN2 storage container can generally last at
least 10 years and is easily recycled, as opposed to a battery cell.
No comments:
Post a Comment