We were told that some of our information was overly voluminous (i.e. too many details, some of which could be moved to an appendix), so in the case of understanding the existing hybrid electric market, we created a chart that showed the basic information graphically and moved the detail to the appendix of our plan. The make it easier for the reader and the plan more concise.
Secondly, we tightened up some of the language in the text in order to clearly articulate the specific markets for each of our target customer groups. We may work to present this graphically as well.
Third, we made an effort to segment the industry data from the market data so that this wasn't confusing to the reader.
We also reorganized the value chain diagram, with the explanation first, then the diagram, along with the formatted details of the chain and number of suppliers.
**********************
We also reorganized the value chain diagram, with the explanation first, then the diagram, along with the formatted details of the chain and number of suppliers.
**********************
Below is the current revised section of our Industry analysis:
The hybrid energy transportation industry is the primary
area that Cryogenic Power Inc. will be engaged in and there are no specific NAICS
codes for participants in this area. The industries that best describe what we
do are found in NAICS codes 42312 Automotive parts, new and 541690 Energy
consulting services.
Drivers and fleet operators are demanding greater gas
mileage from their vehicles. Communities are demanding fewer
emissions from industrial sources and from vehicles. The government
has responded to these concerns through ever tightening EPA restrictions.
Manufacturers are striving to achieve better miles per gallon (MPG) through
gearing, aerodynamics, variable transmissions and other engineering advances,
but they are reaching their limits. Vehicle manufacturers are increasingly
turning to alternative energy sources. These include: natural gas,
hydrogen, propane and electric energy. The ultimate goal of CPI is help meet
these customer needs and to be the alternative energy technology of choice for
passenger vehicles, trucks, buses, railroads and ships.
The CPI technology that we are employing will initially
require installation on a hybrid vehicle. The most prevalent of these are the
gasoline and diesel hybrid passenger vehicles.
These hybrids run on electricity at low speeds and fossil fuels at higher
speeds. Table 2 demonstrates the sales of hybrid passenger vehicles since
2007. As indicated, in the U.S. there
are nearly 257 million vehicles registered in the U.S. (IHS, 2015). Of that
number only 4 million hybrid vehicles have been manufactured and sold from 2007
to 2015. As indicated, the market is dominated by Toyota, Honda and Ford, but dozens
of other manufacturers have entered the market.
The hybrid market is in its infancy and growing. In 2012 the
market was estimated $83.5 billion dollars.
The growth rate is expected to be about 3 percent a year and reach $271.9
billion by 2019. By the end of 2019,
sales of hybrid vehicles are expected to reach 64.4 million units globally
(Transparency Research, 2015).
Table 2. Hybrid Electric Vehicle (HEV) Sales
In the U.S. there are a total of 3.1 million potential
clients with hybrid electric cars, so the Company would need to focus attention
on which kind of passenger would be most effective to design and market the
system. It is clear from Figure 4, that the market share is dominated by
Toyota and that their best seller is the Prius. The Prius was one of
their earliest designs and has continually been refined. From Toyota's
own data, we know that they have sold over 6 million Priuses worldwide
and 1.5 Million sold in the U.S. Through extrapolation of average car
life, we can assume that there are 1.3 million of them on the road.
FIGURE 4
The largest markets for hybrid vehicles is California with
698,560 Hybrid cars registered. Texas was second with 153,557 registered
vehicles. Florida was third with 150,885 vehicles. Washington, New
York, Pennsylvania, Illinois, North Carolina, Georgia, and Ohio rounded out the
top 10 according to Green Car Reports publication in 2014.
Again, extrapolating from these figures, there are approximately
30 percent of the Florida hybrid owners that have Priuses. This creates
a market share of approximately 50, 000 owners in Florida to whom we can market
our product in the early stages.
In addition to automobiles and light trucks, another potential
area is buses. DOT (2014) reported that there were 872,027 buses on the road in
the U.S. APSA reported that in 2014, 41.3 percent of the buses were using
alternative energy and 16.9 percent of these use hybrid electric technology. That means slightly more than 360,000 of
these are running on alternative energy and a little more than 147,000 are
running on hybrid electric. These buses
get an average of 7.2 MPG and travel an average of 17,500 miles annually.
Probably the most lucrative area to begin working is the
railroad industry. Most of these run on a diesel electric system. Since they use the diesel engines to create
electrical power to create propulsion, the CPI technology could be easily
adopted to existing systems. These vehicles last about 30 years and travel an
average of 60,100 miles and gets .14 miles to the gallon (DOT, 2013). These
statistics also indicate that there are 25,000 locomotives on U.S. railroads.
In terms of tractor trailers, Popular Mechanics (2012)
reported that there were approximately 1.9 million vehicles on the road. Of
these, a small, but increasing percentage have adopted hybrid electric
technology. Current systems which
develop power from braking are also in use.
According to DOT statistics, the average mileage for tractor trailers is
5.8 miles per gallon. The average number
of miles traveled per vehicle is approximately 60,000 per year and many trucks
have logged over a million miles (DOT, 2013) in their useful lifetimes. So,
based on that 1 million miles, and a diesel fuel cost of $3/gallon, a truck
owner could realize more than $300,000 in diesel savings over the lifetime of
the vehicle, plus additional costs savings from the lower cost of liquid
nitrogen.
Porter Five Forces Analysis
Bargaining Power of
Suppliers
The bargaining power of suppliers is moderate. There are four main players in Hydrogen and
Oxygen production market. They are:
Praxair Inc. 36.3% market share, Air Products and Chemicals Inc. 26.5%, The
Linde Group 18.3% and Air Liquide 7.8%. Nitrogen is a waste gas in the air
separation process. Since Nitrogen makes
up 78% of the air that we breathe, Nitrogen is a waste gas that is often vented
off in to the atmosphere by these producers.
It is used in welding, quick freezing food and medical facilities. LN2 is available in virtually every
city. Given the concentration in the
market and opaqueness in pricing, suppliers exert some control over the price
per cubic foot.
There are minimal switching costs when it comes to moving
from one supplier to another. Changing
from one technology to another would be costly. For example, changing from electric to
hydrogen would mean retooling the car to run on a gas vs electrical energy.
Auto parts makers are prevalent in the market. There are a number of suppliers and lots of
choices for the components. These makers and resellers have a low level of
influence over the marketplace. This is
similar in the cryogenic storage unit space. We will use a unit called a Dewar
that is used to store the LN2. We will need a turbine, heat exchange equipment
and other equipment that is readily available in the marketplace. All of these
vendors have extensive distribution channels. Some suppliers are vertically
integrated.
Bargaining Power of
Buyers
Customers have a moderate level of influence over the
market. In terms of vehicle suppliers,
there are a large variety of automakers each providing many different models of
trucks, SUVs, vans and sedans. Some of these automakers have entered the hybrid
vehicle market and are offering one or more models.
In the train, tractor trailer, and shipping industries,
there are several models that are being offered. Buyers influence would therefore be limited
and their power moderate.
Threat of Substitutes
The threat of substitutes is moderate as the proliferation
of alternative energy technologies continues to grow. There are systems that operate on hydrogen,
propane, natural gas, electricity and other energy sources. Moreover, customers
can continue to use mainstream fossil fuels such as gasoline and diesel. The
threat of substitutes is moderate.
Threat of New
Entrants
The threat of new entrants is limited as there no
alternative energy source has been widely adopted as of yet. There are nascent
competitors offering hydrogen, propane, natural gas and other alternative
energy sources. It is extremely expensive for these companies to create
infrastructure. Many of these
technologies leave drivers range bound, tied to their refueling center and in
some cases left waiting for refueling to take place.
In other industries, such as buses propane and natural gas
are the prominent energy sources. Trains, long haul trucks and ships have not
adopted alternative fuel technologies to any measurable extent.
Rivalry among Existing
competitors.
There is strong rivalry among the various automakers in the
hybrid sector. Each is using engineering
techniques to recapture energy and store it in a battery for later use. There
has been some experimentation with respect to alternative fuels such as
hydrogen, natural gas, etc. The penetration of these technologies into
mainstream has been minimal.
By far the largest penetration of these technologies has
been in the area of the hybrid cars.
They are able to use gasoline or diesel and use generated electrical
power to drive the engine at lower speeds.
At higher speeds or when the battery power is expended the engine spools
up and provides traditional power to the vehicle. What consumers look for is
reliability, payback period and extension in gas mileage. Companies that win focus on these areas.
In the train, long haul trucking and shipping side there is
minimal use of the hybrid or alternative energy technology.
CPI will be a tier 1 supplier. In this supply chain, there
are a host of suppliers both in the U.S. and internationally. These are shipped
to second tier suppliers. Cryogenic Power Inc. is a tier 1 supplier. We
will take the parts from these tier 2 suppliers and then assemble them into a
CPI power unit. These will be sold to vehicle manufacturers who will place them
into their products. OEMs will send finished products to their third
party logistics (3PLs) companies. These in turn will be sent out to dealers who
will sell them to customers.
INDUSTRY: Value Chain
Diagram -- Auto Parts
n The number
of domestic N auto parts suppliers is: 42
n The number
of global tier N parts suppliers is: 174
n The number
of Tier 1 suppliers is: 60
n The number
of raw material suppliers is: 29
n The number
of major OEMs is: 13
n The number
of 3PLs is: 40
n The number
of auto dealers is: 17,767




No comments:
Post a Comment