There are a number of conversion kit manufacturers and
installers that operate in the natural gas and propane vehicle conversion
space. There is no central player or technology
that dominates the market and new technologies are constantly improving on
existing designs. The market is very fragmented with a number of players
operating in this space. The primary competitors in this space are listed below (Weaver, L 2014 & 2015). When our technology becomes commercially
available, we may contact some of these businesses to determine if they want to
form joint ventures to carry our conversion kits.
When considering the competition, it is also important to think
of the major substitute products.
Plug-in hybrid electric vehicles are certainly a consideration. Vehicles such as the Chevy Volt, can get
upwards of 300 miles per gallon, but have significant range limitations on
electric power alone. Additionally,
plug-in hybrids are not particularly green, when the source of the electrical
power from the grid is still derived primarily from fossil fuels. Even in states like California, with copious
wind and solar installations, the vast majority of power used at night (when
most hybrid plugin vehicles are charging) is drawn from out of state coal-fired
plants.
Hydrogen vehicles are another consideration. Hydrogen does not occur in useful quantities
in nature (unlike nitrogen), and as such, it has to be produced by using
electricity to divide water into hydrogen and oxygen. Additionally, because of
hydrogen’s small molecular size, it leaks – a lot. It is also very corrosive such that tanks
have to be lined at significant cost, while other parts in a hydrogen system
have to be replaced frequently. Overall,
the cost of building plants to produce hydrogen, storing it, and then
distributing it are massively expensive, making its overall viability highly
questionable.
Finding market share, sales, distribution, and production data on such a new and fragmented industry, is fairly difficult. On one side, there is plenty of data about hybrid electric car sales.
And there is also some data on some types of substitute products like compressed natural gas:
But finding information on aftermarket conversions is far more difficult.
One important thing to note is that a number of competitors have been able to obtain certification from the California Air Resources Board (CARB), and the EPA that their products qualify, which is something CPI will need to pursue.
Claims for aftermarket systems are all over the board, with a large majority of competitors claiming 100 mpg or more (although many neglect to include the cost of charging in their calculations). Our product boasts a 2.6X mileage increase, while actually lowering the overall cost of fuel needed to achieve that increase:
Our competitive position is protected by a pending patent in the United States, and we are considering patents elsewhere. Our primary competition in liquid nitrogen is in the UK, but they have been so focused on development (of a different type of system), that they did not patent in the U.S. until after we first filed.
Most existing businesses are very small, and lack any sort of intellectual property or significant capital backing. They are mostly just small shops making alternative fuel alterations.
LIST OF COMPETITORS
n A-1 Alternative Fuel Systems converts
your vehicle to CNG or LNG. They are based in Fresno, Calif.
n ACME Alternate Fuel Systems. Acme
Alternate Fuel Systems is based in Mankato, Minn., and offers propane
conversion kits as well as training on installation.
n Agility Fuel Systems provides engines
and conversion kits that are both EPA- and CARB-certified. They have products
available for most GM and Ford vehicles.
n Alternative Fuel Systems of St. Louis
specializes in CNG and LP vehicle conversions and compression systems. Learn
more at Alternative Fuel Systems of St. Louis.
n American Alternative Fuel. American
Alternative Fuel provides fuel supply infrastructure, conversion equipment,
complete vehicles, service and maintenance for propane use and conversion. They
are based in New York.
n BAF Technologies Inc. is a subsidiary
of Clean Energy Company. Its alternative fuel vehicle upfitting capabilities
include aftermarket CNG conversions of Ford-manufactured vans, cutaway
shuttles, taxis, pick-ups and light-duty trucks.
n Baker Equipment is based in Richmond,
Va., and converts OEM gasoline engines to run on CNG, offering sales,
installation and services throughout the eastern US.
n Baytech Corporation. Baytech, a part of
Landi Renzo USA, offers dedicated propane fuel-injected engines used in GM,
Isuzu, and Workhorse Custom Chassis vehicles and chassis.
n Bi-Phase Technologies. Bi-Phase
Technologies designs and manufactures liquid propane electronic fuel injection
systems targeting fleets. Their conversion systems are EPA/CARB certified to
the 2010 level, the most stringent emissions standard available. They are owned by the Schwan Food Company and
developed the technology to convert that company's fleet of more than 5,000
vehicles.
n Carburetion & Turbo Systems Inc.
When this company started out, the wide majority of its work was in converting
all kinds of engines to CNG and LPG. Today, most of its business involves
shipping conversion kits around the world, although it still provides service
for its local Minnesota customers.
n Checkeye LPG Carburetion, Inc. is based
in Springdale, Penn., and offers propane conversions and complete conversion
kits.
n Clean Fuel converts fleet and personal
vehicles to run on CNG, specializing in EPA-certified conversions for sedans
and light-duty pick-up trucks and vans. It operates conversion facilities in
Texas and Oklahoma.
n CNG Interstate notes that its
compressed natural gas systems are after market performance parts and do not
change your vehicle’s current fuel injection system nor do they tamper with the
Federal Emission Standards. CNG Interstate must equip your vehicle with your
new kit.
n Energy and Water Solutions offers two
types of conversion kits for gasoline engines and a low-cost kit for diesel
engines.
n Environmental Vehicle Outfitters
designs and installs alternative fuel systems for fleet and consumer cars, SUVs
and trucks. Based in Marina del Rey, Calif.,
n FuelTek Conversion Corporation's core
business is conversion of on- and off-road vehicles to CNG or LPG vehicles.
Although located in the Denver metro area, they work with a network of
providers in a number of states.
n Fuel Shop Inc. This Florida company
provides propane conversion services, beginning with a vehicle inspection.
Installation onsite takes three days.
n Green's BlueFlame Gas Company, Inc.
Green's Blue Flame partners with Alliance AutoGas, a nationwide group of
propane conversion companies, to provide propane conversion services. The
company's Houston-based propane fleet vehicle conversion center follow quality
engine conversion standards that provide the framework of an operational
conversion network both in Houston and across the country.
n Hendrix Industrial Gastrux provides
EPA-certified conversion kits for a number of vehicles. They do not offer
do-it-yourself kits; conversions must be done at their facility.
n IMPCO Technologies is a business unit
of Fuel System Solutions, Inc., and designs, manufactures and supplies
alternative fuel components and systems.
n Jasper Engines. Jasper Alternative
Fuels, a division of Jasper Engines & Transmissions, offers complete
conversion packages, from alternative fuel engines to accessories, for
conversion to propane or CNG.
n Landi Renzo USA has acquired Baytech Corporation and now offers a dedicated CNG
kit for GM 6.0L and 8.1L engines, as well as the Ford 5.4L engine. The company
installs, calibrates, and provides extended service for its EPA and CARB
certified systems.
n NatGasCar Company has introduced a
Dodge Ram 4.7L Conversion System, beginning with the 2010 model.
n NaturalDrive operates in Arizona and
offers OEM-style retrofits with no under hood wiring modifications. They
partner with a number of automotive facilities to offer CNG retrofits and
warranty service in several states.
n Northwest Propane Gas Company. This company has been providing propane
engine conversion services for more than 60 years. They have completed more
than 20,000 conversions to date, for both public and private fleets.
n Oklahoma Liquefied Gas. Oklahoma
Liquefied Gas offers propane conversion services, specializing in fleet
conversions.
n Omnitek Advanced Technologies offers
proprietary technology for converting diesel engines to natural gas. The
company says it has 5,000 systems installed worldwide.
n Productive Concepts International is
based in Union City, Ind., and claims to be the only high-volume production
line in the US capable of almost any alternative fuels conversion, including
CNG.
n Northwest Propane Gas Company. This company has been providing propane
engine conversion services for more than 60 years. They have completed more
than 20,000 conversions to date, for both public and private fleets.
n Phoenix Energy Corporation offers CNG
conversion, installation and refueling equipment in Alabama and surrounding
states. They are a registered contractor for the federal government.
n Precision Sales and Services, Inc.
Located in Birmingham, Ala., this company provides propane conversion as well
as parts and service.
n Raso Enterprises. This company sells
kits, but specializes in heavy duty and commercial vehicles. There is a limited
amount of information on personal car fleet vehicles, as well as off-road and
agricultural equipment.
n RGR Alternative Fuels is a Nevada-based
certified dealer and installer of EPA-certified bi-fuel CNG conversion systems.
n Roush Clean Tech. The company designs,
engineers, manufactures, and assembles propane and other alternative fuel
systems for light- and medium-duty Ford trucks and vans.
n Superior Propane. This Arizona-based
company is primarily a supplier of propane, but will also work with you to
convert your vehicle to run on LPG.
n Technocarb. Based in British Columbia,
Technocarb designs and manufactures conversion systems that are vehicle
specific, an approach the company says allows them to engineer each system to
provide the best possible performance and emissions while also making for easier
installation. In addition, Technocarb is a distributor of alternative fuel
parts and components.
n Thigpen Energy Services, LLC provides
CNG conversion services.



Great to see that you were able to file for a patent before your largest competitor. It is also great that you are open to the possibility of Joint Ventures so early on, seeing as a JV could help you put your product out faster to a wider range of people. Your numbers speak for themselves and once customers experience your product firsthand, I feel it will create even greater demand.
ReplyDeleteI read the problem and solution you have suggested. The technology you have suggested is very interesting and will provide very good value addition to the consumer. But i am not sure what should be the right way for distribution, the choice to make it as a B2C and targeting Consumers may not bring in profits atleast in US market as percentage of public customizing the vehicles is relatively low and most upgrades are high performance parts and are mostly towards attaining higher speed. In my opinion working with actual manufactures will give more chance of success as a company.
ReplyDelete